Insignia Kansas 1500mm x 900mm Steam Shower Cabin Enclosure Double 2 Person Shower Unit
This luxury double 2 person steam shower cabin has just been added to
our ever growing range of steam showers. Built with all the same popular
features as our other popular showers this really is a great shower to
enjoy and relax in. It is a little larger than the usual 1200mm x 900mm
steam showers this is to help fit into your cloakroom or ensuite.
Product Features:
-
Part of our Premium Range
-
Made by Europes Leading brand Insignia
-
Measures 1500mm x 900mm x 2170mm (WxDxH)
-
Over head rain shower built into the enclosures roof
-
Hand shower with optimal height setting
-
Storage shelf with chrome rail
-
Multi-functional mixer faucet
-
Built in FM Stereo
-
Mobile foot massage
-
5mm Tinted Tempered Glass
-
Extractor Fan
-
Telephone Receiver
-
Steam Generator
-
Acrylic base with steel frame and adjustable feet
-
Easy Glide Doors With Magnetic Closer
-
12 month Total Parts Protection Plan (TPPP) UPGRADE AVAILABLE BELOW
-
6 Hydromassage jets
-
Mirrored backboard
-
Saftey Alarm
-
Ozone System
-
Uniquie wooden floor with 2 built in fold away seats
-
Touch screen control panel - NEW FEATURE
-
Hot and cold connections
-
Can be connected to a combination boiler
-
Low pressure water supply may require a pump. Recommended 2.5 bar pressure
-
CE Certified
-
ISO9001 Approved
-
Please Note: Product upgrades do occure from time to time but for the benefit for the customer and the product!
-
Flow rate of 12/14 litres per minute minimum required
-
We Highly Recommend Pressure Equalising Valve for use with Combi
Boilers to Ensure Balanced Hot & Cold water is supplied to shower
unit.
-
Operates at Pressures of 2 - 3 Bar - We recommend the Salamander ESP75 2.2 bar Shower Pump
-
1/2" Water connections
• Power connection 230-240 V
• 2 - 3 bar water pressure required
• Needs equal pressure hot & cold water supply
• Electrical IP56 sockets 30 amp supply
• Steam generator - 3KW
• Will work from most:
- modern combi boilers- requires Pressure Equalising Valve
Water supply requirement: separate hot and cold inputs are
required, each at a pressure of 1.5 - 3.5 Bar. NB: if the water
pressure is below this range a twin negative head pump must be used
to boost the hot and cold supply.
A pump must not be used on the output of a combi boiler.
Installation guidelines:
150mm clearance must be allowed for between the cabin roof and ceiling
to allow adequate venting. It is essential that a fully qualified
electrician install the unit in accordance with current regulations.
The product requires hard wiring into the mains.
*Please note that due to manufacturer improvements slight differences
can occur when compared to images used such as control panel but all
features are generally the same and are normally improved upon as
aresult in changes.
