Florida Quadrant Steam Shower Cabin Enclosure 950mm x 950mm

Check out this amazing 950mm Steam Shower cabin, it is the perfect size to replace your current shower cabin and is suitable for use in most ensuite bathrooms.  It comes with all the latest features that you would expect in a steam shower cabin.

Product Features:

Made with 5mm Toughened Glass, Aluminum Alloy and ABS board

• 950mm x 950mm Steam Shower Cabin
• 3KW Steam Generator
• LCD Computer control
• Thermostatic Mixer Shower
• Top Rain Shower
• Handheld Shower Head
• Top & Background lights
• 6 Back Massage Jets
• Stainless Stain Support Frames Under ABS Capped Tray
• Foot Massager
• Ozone Sterilization System
• Radio
• Operates at Pressures of 1.5 - 4 Bar
• Dimensions: 950mm x 950mm x 2180m approx
• Weight: 122kg nett/125kg gross
• Packaged in 4 Boxes
• Optional Fitting Kit - Comprises of: 2 x braided hoses, PTFE Tape, 2 x clear silicone, 2 x isolating valves and special adapted waste. Add this accessory pack to your order for a special online price. For More Info - Click Here
• Optional Thermostatic Valve - allows you to regulate safely the water temperature.
• iShower Compatible - Check Here for Product Info not included as standard but is an optional extra.
  
• Optional ShowerGuard - Shower guard will protect your new investment permanently from limescale.  It also makes cleaning a lot easier and is water resistant making it easier to clean the glass, Any non-abrasive cleaner can be used Check Here for ShowerGuard Product Info
• Optional PEV - Pressure Equalising Valve is designed to Balance the hot & cold water pressures for use with Combi Boilers to ensure your shower is protected against un-balanced hot & cold water pressures.  Check Here for PEV Product Info
• Backed Up With a Comprehensive 1 Year Parts RTB Warranty
• Fully European CE Approved
• Industry Standard ISO 9001 Manufacturer

Please note these units must be installed by qualified plumbers and electricians for legal and warranty reasons.

Water supply requirement: separate hot and cold inputs are required, each at a pressure of 1.5 - 3 Bar. NB: if the water pressure is below this range a twin negative head pump must be used to boost the hot and cold supply.

A pump must not be used on the output of a combi boiler.

Installation guidelines:

- Please Click Here To Download the Instruction Manual

150mm clearance must be allowed for between the cabin roof and ceiling to allow adequate venting. It is essential that a fully qualified electrician and fully qualified plumber install the unit in accordance with current regulations. The product requires hard wiring into the mains.