Aqualux Florenta Quadrant Steam Shower Enclosure Cabin 900mm x 900mm
The Aqualux Florenta Quadrant Steam Shower Cabin includes 4 body massage jets to refresh and relax you, whilst the steam will nourish and detoxify your skin to leave you with a healthy glow and feeling of wellbeing.
Product Features
Includes roof, walls, shower tray and drainage kit
- Steam Generator
- 3KW Steam Generator
- Overhead monsoon rain shower
- Electronic control pad
- Built in lighting
- Built in radio & speaker
- Built in Thermostatic Shower Mixer
- 4 Body Hydro Jets
- Hand Held Shower
- Sliding doors
- Tempered Glass
- Includes Quadrant shower tray
- Extractor Fan
- iShower Compatible - Check Here for Product Info not included as standard but is an optional extra, please see options. If ordered with your steam shower you can save £10.
Backed Up With a Comprehensive 2 Year Warranty
Fully European CE Approved
Dimensions: 900mm * 900mm * 2200MM
Please Click Here To Download the Instruction Manual
Operates at Pressures of 1.5 - 4 Bar
Please note this model does not have thermostatic water control valves we advise the installation of a pressure equalising valve to help regulate the hot and cold water pressures. (this will help if/when someone turns on the cold/hot water elsewhere)
Ensure at least 6" clearance is available over the roof and that the unit is able to come out from the wall for maintenance purposes
Installation guidelines for
Aqualux Steam Showers
Specification:
- Working voltage: 220 - 240 Volts
- Power consumption: 2500 - 3800 Watts
- Maximum current draw: 15.8 - 17.3 Amps
- Water consumption: 900 - 1200 litres per hour
- Working water pressure of steam generator: 0.75 Bar
Water supply requirement: separate hot and cold inputs are required, each at a pressure of 1.5 - 3 Bar. NB: if the water pressure is below this range a twin negative head pump must be used to boost the hot and cold supply.
A pump must not be used on the output of a combi boiler.
Installation guidelines:
150mm clearance must be allowed for between the cabin roof and ceiling to allow adequate venting. It is essential that a fully qualified electrician and fully qualified plumber install the unit in accordance with current regulations. The product requires hard wiring into the mains.
